If you have questions about any part of your station duty, ask your lieutenant to help you.

Date *
Date
Saws/Generator
Check Chain Saw? *
Check the Fuel and Oil before turning on. Rev the engine for about 15 seconds and then turn off while rev'd at full power.
Check Circular Saw? *
Check the Fuel and Oil before turning on. Rev the engine for about 15 seconds and then turn off while rev'd at full power.
Check the Concrete Saw? *
Check the Fuel and Oil before turning on. Rev the engine for about 15 seconds and then turn off while rev'd at full power.
Check Portable Generator? *
Check the Fuel and Oil before turning on. Leave it on for 5 minutes. To turn it off, turn off gas and let it die, then turn off switch.
Fluids
Check Motor Oil Level? *
Check while engine is COLD
Check Radiator Fluid? *
Check while engine is COLD
Check Power Steering Fluid? *
Check while engine is either HOT or COLD. See line on dip stick.
Check the Automatic Transmission Fluid? *
Check while engine is HOT
Check Vehicle Fuel Level? *
Should be filled every 30 miles. Only fill if you are approved by your Lt. to drive it to the pumps.
Other items
Check Tire Pressures? *
Check the Lights? *
Headlights, High Beams, Turn Signals, Brake Lights, and Emergency Lights (Some white lights only turn on while in drive), Light Tower (Make sure it lowers after!)
Check the Oil Dry? *
Make sure there are 3 full tubs
Is the 'Dry Chem' full and charged? *
Check that all equipment is on the truck? *
Please re-state all issues with the truck found in the above questions.